+44(0)161 320 9237
Data Sheet
Product description.
0.315 mm Type K Glass lapped and pair laid flat Glass Braided Silicone Impregnating resin
Applicable standards
BS 4937
BSEN 60584.2 relevant parts BSEN 60584.1 Class 1
All comparable international standards.
Construction.
Single strand of 0.315 mm diameter wire.
Each leg double glass lapped and varnished laid flat glass braided and varnished with Silicone Impregnating resin.
Conductor material.
Positive leg - Nickel/Chrome -
Negative leg - Nickel/Aluminium -
Insulation Maximum operating Temperature.
450 degrees C
Health and Safety information.
No personal protective equipment required when used under normal operating conditions. Product represents no health risk when used under normal conditions
In case of fire use water
In case of smoke inhalation during combustion remove casualty to fresh air and seek medical attention.
In case of ingestion seek medical attention
Good industrial hygiene practices should be followed.
If skin irritation occurs area should be flushed with cold water
If glass dust is produced due to rough handling it should be washed off immediately. In case of contact with eyes flush with copious amounts of clean water and seek medical attention.